19 hp, Kohler Command Pro Engine, CH620-3158, 674cc, No Control Panel, 1 in. x 3 in. Crankshaft, Free Shipping, No Tax.
Replaces CH18 62502 / PA62502, CH620-3005, CH620-3104
Standard Features:
- Overhead Valve Design
- Hydraulic Valve Lifters
- Electronic Ignition
- Dual Element Air Cleaner
- Closed Breather System
- Stellite Exhaust Valves
- Cast Iron Cylinder Liners
- Full Pressure Lubrication
- In-Line Fuel Filter
- Easy Access Valve Cover Oil Fill
- Oil Level Dipstick
- Oil Filter
- Dual Oil Drain
- Oil Sentry (Switch Installed and Wired but Unconnected)
- Variable Speed Governor
- Fuel Shutdown Solenoid
- Smart-Choke Carburetor
- Mechanical Fuel Pump
- 12 Volt Solenoid Shift Starter
- 15 Amp Alternator, Regulated
- Crankshaft-1" (25.4 mm) Diameter x 3.0" (76 mm) PTO Length, 0.25" (6 mm)
- Keyway, Drilled and Tapped 1" (25.4 mm) Deep, 3/8-24 UNF
- PTO Face-5" (127 mm) Diameter, (4 Holes) 5/16-24 x 0.67" (17 mm) Deep, 6.5"
- (165 mm) Diameter, (4 Holes), 3/8-16, 7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
- 5.75" (146 mm) Diameter Pilot
Note: This has engine do NOT have Engine Controls-Key Switch, Throttle and Choke Controls it is setup for remote.
Exhaust System Kit are NOT included