Click Fraud Protection

OPEengines.com - Online Store
OPEengines.com OPEengines.com
Home   Log In

Kohler Engine CH740-0101 22 hp Command Pro 725cc Lp/Ng

$2897.00

Always Free Shipping
Add Qty:

Description

22 hp Kohler Engine CH740-0101 Command Pro 725cc Liquid Propane /Natural Gas

Command PRO gaseous fuel engines are designed to run on either natural gas (NG) or propane (LP).
This professional line of carbureted propane and natural gas engines eliminates bad gasoline issues and last longer than gasoline engines.

Command PRO Features:

  • Crankshaft- 2401402, 24014345, 1.125 inch (1 1/8 inch)(28.575 mm) Diameter x 4.0 inch (101.5 mm) PTO Length, 0.25 inch (1/4) (9.5 mm) Keyway, Drilled and Tapped 1.5 inch (38 mm) Deep, 7/16-20 UNF
  • PTO Face-5.625 inch (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67 inch  (17 mm) Deep, 7.75 inch (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83 inch (21 mm) Deep
  • 7 inch (178 mm) Diameter Pilot
  • High Efficiency Overhead Valve Design
  • Zero Maintenance Hydraulic Valvetrain
  • Cast-Iron Cylinder Liners
  • High Efficiency, Low-Noise Cooling Fan
  • Full Pressure Lubrication System to all Bearings
  • Hardened, Micro-Polished, Dynamic-Balanced Crankshaft
  • Easy-to-Identify Yellow Oil Service Points for Valve Cover Oil Fill and Dipstick
  • International Emissions Certifications
  • 3 year Unlimited Hour Commercial Warranty
  • Designed to operate on both Propane or Natural Gas Fuels
  • Rated per SAE J1940 22 HP on Propane and 19.5 on Natural Gas
  • Easy Start with Digital Spark Advance Ignition and High Torque Solenoid Shift Starter
  • Kohler Low Profile, Dual-Element Air Cleaner System
  • 15 Amp Regulated Charging System
  • Low Oil Pressure Sentry Protection
  • Engine-Mounted Oil Cooler
  • Low Pressure Fuel Regulator Included as Accessory – Not mounted to engine
  • Note: Customer supplies High Pressure Fuel Regulator for Propane usage (if applicable)
Engine type

4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block

Model Command PRO CH740LP
HP (kW) 1 22(16.4)
Displacement (cc) 44 (725)
Bore in (mm) 3.3 (83)
Stroke in (mm) 2.6 (67)
Gross Torque ft lbs (Nm) 1 33.9 (46)
Compression Ratio 9.0:1
Dry Weight lbs (kg) 94 (43)
Oil Capacity US qts (L) 2 (1.9)
Lubrication Full pressure w/full-flow filter
Dimensions LxWxH (in)* 14 x 17.7 x 19
Backpressure Limit 2 50
Certified Power HP (kW) 3 20.8 (15.5)
Certified RPM 3600
Engine Type Commercial
 

*Length is grass screen to PTO mounting face. Width is spark plug to spark plug. Height is top of air cleaner cover to mounting feet.

1 Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

3 J1995 power and torque certified by 3rd Party Witness

 
 

Specs

  • Model: PACH740-0101
  • UPC: 650531850669
  • Shipping Weight: 125lbs
  • Manufactured by: Kohler

Your IP Address is: 100.26.140.179
Copyright © 2006-2024 OPEengines.com - Kohler Engines and Kohler Parts. Hosted by GeekHost!.
Live Chat Software