Kohler Part # 2443501S Fuel Solenoid Assembly For Keihin Carbs

Name: Kohler Part # 2443501S Fuel Solenoid Assembly For Keihin Carbs
Brand: Kohler
Price: 140 USD
Availability: InStock

Description

Kohler Part # 24 435 01-S Fuel Solenoid Assembly Only, For Keihin Carbs.
Use 2475701S for complete kit.

For more detailed instruction Click Here To Download A Free Kohler Service manual

Most carburetors are equipped with a fuel shut-off solenoid. Solenoid is attached to fuel bowl. Solenoid has a springloaded pin that retracts when 12 volts is applied to lead, allowing fuel flow to main jet. When current is removed, pin extends blocking fuel flow. Below is a simple test, performed with engine off, that can determine if solenoid is functioning properly.
1. Shut off fuel and remove solenoid from carburetor. When solenoid is loosened and removed, gas will leak out of carburetor. Have a container ready to catch fuel.
2. Wipe tip of solenoid with a shop towel or blow with compressed air to remove any remaining fuel. Take solenoid to a location with good ventilation and no fuel vapors present. You will also need a 12 volt power source that can be switched on and off.
3. Be sure power source is switched OFF. Connect positive power source lead to red lead of solenoid. Connect negative power source lead to solenoid body.
4. Turn power source ON and observe pin in center of solenoid. Pin should retract with power ON and return to its original position with power OFF. Test several times to verify operation