Kohler Engine CH730-3008 23.5 hp Command Pro 725cc 1 1/8 Crankshaft

Name: Kohler Engine CH730-3008 23.5 hp Command Pro 725cc 1 1/8 Crankshaft
Brand: Kohler
Price: 2350 USD
Availability: InStock

$2350.00

Add Qty:

Description

23.5 hp, Kohler Command Pro Engine, 725cc, CH730-3008, 1 1/8" x 4" Crankshaft, Free Shipping, No Tax.

Replaces Old Kohler Engine Spec# 68503, 68591, 68518, CH730-0039,, CH730-3201, PSCH730-0039, CH730-3000
Good replacement for CH730-3300,

This engine was rate as 25 hp but with new rating system it is now rated as 23.5 hp, It's still a 725cc engine.

Overhead Valve Design
Hydraulic Valve Lifters
Engine Mounted Oil Cooler
Cast-Iron Cylinder Liners
PTO Sleeve Bearing (Side Load)
Electronic Ignition
Large Capacity Dual Element Air Cleaner
High Efficiency Grass Screen and Fan
Closed Breather System
Stellite Exhaust Valves
Full Pressure Lubrication
Large Capacity In-Line Fuel Filter
Easy Access Valve Cover Oil Fill-Yellow
Oil Level Dipstick-Yellow
Large Capacity Oil Filter, Dual Oil Drain
Oil Sentry (Switch Installed and Wired but Unconnected)
Variable Speed Governor
High Performance Accelerator Pump Carburetor
Fuel Shutdown Solenoid, Smart-Choke Carburetor
Mechanical Fuel Pump
High Performance Spark Plugs
12 Volt Solenoid Shift Starter
20 Amp Alternator, Regulated
Fixed Grass Screen Guard
Engine Controls- Key Switch, Throttle and Choke Controls
Crankshaft- 2401402, 24014345, 1.125 inch (1 1/8 inch)(28.575 mm) Diameter x 4.0 inch (101.5 mm) PTO Length, 0.25 inch (1/4) (9.5 mm) Keyway, Drilled and Tapped 1.5 inch (38 mm) Deep, 7/16-20 UNF
PTO Face-5.625 inch (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67 inch (17 mm) Deep, 7.75 inch (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83 inch (21 mm) Deep
7 inch (178 mm) Diameter Pilot
Old UPC 650531985101 CH730-3201